Gate 1: data check
Engineer review
Check the testBand 1Band 2Band 3Band 4Band 5
Bad data, off-standard test conditions or an unfamiliar design.
What your team does: An engineer checks the test. No prediction is shown until it passes.
Energy Testing Platform
Predict a product's energy consumption before the test is complete.
Energy Mark turns live laboratory measurements into an early forecast of your product's final energy consumption, complete with a prediction range.
Your data stays in your environment. Your results prove the value.
Live inputs
Ambient32.0 °CHumidity75 %RHPower118 WVoltage230 V
Predicted final energy consumption
Refrigerator
Annual energy consumption
412kWh/yr
Range ± 9 kWh/yr
Read at 11% of the testTest still running
Band 1Band 2Band 3Band 4Band 5
Predicted: Target match
The outcome
Will your product meet its energy target?
Find out before the test ends. Open any running test to see the prediction, its range and the live readings behind it.
Energy MarkTest inbox / Lab A / CH-20481QA
6Tests running
3Early reads given
2Continue testing
1Engineer review
Live 6CompletedAll
Lab A| Unit | Elapsed | Prediction | Target band | Early read |
|---|---|---|---|---|
| CH-20481CF-300 · Chest freezer | 23% |
412 | Band 4Predicted Band 4 | Target match |
| AC-11872RAC-18i · Inverter AC | 18% |
1,086 | Band 3Predicted Band 3 | Target match |
| RF-30217FF-450 · Frost-free refrigerator | 34% |
298 | Band 3Predicted Band 4 | Outside target |
| WM-50933WM-8 · Washing machine | 22% |
0.84 | Band 4 | Continue testing |
| WH-77310WH-25 · Water heater | 11% |
Not yet | Band 4 | Continue testing |
| CH-20502CF-500 · Chest freezer | 23% |
Not yet | Band 4 | Engineer review |
Today
Your lab already holds the answer. Energy Mark reads it early.
Your lab is collecting measurements. Your engineers are still waiting for answers.
Wait for the full run
Every decision waits for the last reading. Off-target units and wasted runs are found late, and redesigns start late.
Add more test capacity
More rigs and chambers cost capital and floor space. Each test still takes just as long to give an answer.
Give your data team a head start
Energy Mark brings a proven method, so your data and analytics teams start from working predictions, not a blank page.
Energy Mark gives you the answer early, without changing the test.
Speed
Know where the test is heading, early in the run.
Energy Mark begins analysing measurements while the energy test is still underway, providing an early indication of the likely outcome when sufficient evidence is available. The POC measures how early it holds for your products.
Deep freezerAbout 16 h
Air conditionerHours per test point
Water heaterAbout a day
Motor or transformerHours of heat run
EV batteryWeeks of cycles
How it works
Built on historical test results, Energy Mark predicts energy performance as each new test progresses.
No new sensors and no change to your test procedure. Four steps, from the logger on your rig to the result on your screen.
01
Connect your loggers
Energy Mark picks up what your data logger already records every few seconds: power, voltage, temperatures, humidity and cycles.
02
Learn from past tests
It studies your completed tests and their certified results, so it knows how the first part of a test relates to the final number for each product.
03
Check, then predict
On a new test, it first checks the data is valid. Then it predicts the final energy consumption, with a range that narrows as the test runs.
04
Show the band
Your standard's own formula turns that number into a band. Your team sees it against the band the product is designed for, with the next step.
Decision gates
Every test reaches one of four decisions.
While the test runs, Energy Mark checks the data, then the prediction, then the band. Each result comes with a clear next step.
- Live testLogger data arrives
- 1Data valid?If not: Engineer review
- 2Range narrow enough?If not: Continue testing
- 3Inside the target band?Yes: Target match. No: Outside target
Band the product is designed forPredicted range
Gate 2: range check
Continue testing
Not clear yetBand 1Band 2Band 3Band 4Band 5
The predicted range is too wide, or it crosses a band boundary.
What your team does: Let the test run. Energy Mark checks again at the next point.
Gate 3: band check
Target match
On trackBand 1Band 2Band 3Band 4Band 5
The whole predicted range sits inside the band the product is designed for.
What your team does: Move on to the next unit or design. The full test still certifies.
Gate 3: band check
Outside target
Off trackBand 1Band 2Band 3Band 4Band 5
The whole predicted range sits outside the band the product is designed for.
What your team does: Start the engineering fix now, not at the end of the test.
Who it is for
Built for technology, testing and data teams.
CIO, CTO, Head of Analytics
Technology and analytics
Lab data becomes a governed prediction system, on your premises.
- Runs inside your network
- Every prediction logged and auditable
- Your data never leaves site
Product, R&D, QA and QC
Plant teams
See where the energy result is heading while the test runs.
- Compare design variants sooner
- Flag off-target units early
- Catch bad test conditions mid-run
Sourcing and commercial
Procurement
A POC first, then a clear annual licence.
- Prove it on your own data first
- Licence by SKU or per test
- Runs on your premises
Honest by design
An energy predictor your lab can trust.
Always a range
Every prediction shows its uncertainty. A single number would hide it.
Holds back when unsure
Wide ranges, bad data and unfamiliar designs get Continue testing or Engineer review, never a guess.
Your standard decides the band
The model predicts energy. Your standard's published formula sets the band. No model guesses it.
Never certifies
The full test still runs and certifies. Every prediction is logged against the certified result.
Questions
What teams ask first.
What is Energy Mark?
Energy Mark is an energy testing platform for product labs. It reads live measurements from your test rigs and predicts the product's final energy consumption, with a prediction range, before the test is complete. The full test still runs and certifies the result.
What exactly does Energy Mark predict?
The final result of a product energy test, such as annual energy consumption, energy per cycle or standing loss, from the data logged early in the test. Every prediction comes with a range and the band it falls in.
Does it replace the regulatory energy test?
No. The full test still runs and still certifies the result. Energy Mark tells you where that result is heading, early enough to act on it.
Which products does it work for?
Any product with a measured energy test: refrigeration, air conditioning, water heating, laundry, cooking, lighting, electronics, motors, pumps, fans, compressors, transformers, solar, batteries and tyres.
How accurate is it?
Accuracy depends on your products and your data, so we measure it rather than promise it. It is reported on whole units the model has never seen, against their certified results, including how often an early read disagreed with the final test.
What does it need from our lab?
Exports from the data logger you already use, completed tests with their final results, and basic product details. No new hardware.
How quickly can we start?
Quickly. The platform, its screens and its data pipeline already exist, so a POC on your own tests runs on working software from day one.
How is it licensed?
An annual licence, sized by the number of SKUs you predict for or by the tests you run. The platform runs on your premises.
Is there a free trial?
No. Every licence starts with a POC on your own completed tests, because predictions are only meaningful on your products.
Proof of concept
See it predict your own tests.
A POC on your completed tests shows how early the final result becomes clear for your products.